High-Pressure Flushing Camera for Inspection While Jetting
A high-pressure flushing camera combines two work steps into one. You flush the pipe under high pressure and see live what is happening inside the line at the same time. The bend-capable camera head is guided into the pipe together with the flushing hose and follows the run of the pipe even around bends. This lets you check the cleaning result directly, without scheduling a second pass with a separate camera for the visual inspection. As a manufacturer based in Bad Abbach, Germany, we build these specialised cameras ourselves, Made in Germany and designed for tough site use.
Inspection and high-pressure jetting in a single pass
Traditionally, companies separate cleaning and inspection: first they jet, then they check with a push camera. The high-pressure flushing camera merges the two. Because the camera runs in parallel with the flushing, you immediately see whether a blockage has really cleared, whether deposits remain or whether a defect was the cause. This saves a complete work pass, shortens the time on site and gives your customer a result you can document right away. For sewer cleaning and rehabilitation contractors in particular, this is a noticeable gain in efficiency.
The Drexl 3800-SK high-pressure flushing camera
Our model is the 3800-SK high-pressure flushing and bend camera. It works in pipes from 100 to 300 mm in diameter (NW 100 to 300) and is waterproof up to 4 bar, so it is built for continuous use under jetting pressure. The bend-capable camera head can be used with flushing hoses in 3/8" and 1/2", and the 60 metre camera cable gets you to the target even over long distances. You view the picture on the 8 inch LED monitor. With a shipping weight of 12 kilograms, the system stays easy to transport.
Like all of our own devices, the 3800-SK is TÜV-tested and comes with a three-year warranty. On request, we also offer the camera on a leasing basis as an alternative to outright purchase, and we ship free of charge within Germany.
The matching water pressure comes from our high-pressure jetters, and you will find the corresponding high-pressure flushing hoses in 3/8" and 1/2" in the accessories. For an overview of all camera types, see our main category, pipe and sewer cameras.
What our customers say about us
On the independent review platform AUSGEZEICHNET.org, over 3,400 customers have rated us an average of 5.0 out of 5 stars. The reviews come from tradespeople, plumbing companies, industrial firms, and municipal utilities; every single review is verified for authenticity. Clicking on the seal opens the full review overview.
Frequently asked questions about high-pressure flushing cameras
What is a high-pressure flushing camera?
A high-pressure flushing camera is a pipe and sewer camera that is guided into the pipe together with the flushing hose. It enables inspection in parallel with high-pressure jetting, so that cleaning and visual inspection happen in a single pass.
Why do you need a camera that works in parallel with the flushing?
You see directly whether the jetting was successful, whether deposits remain and exactly where a defect is located. This saves the second pass with a separate camera and speeds up the work on site.
Which pipes is the 3800-SK suitable for?
The 3800-SK is designed for pipes from 100 to 300 mm in diameter (NW 100 to 300) and can be used with flushing hoses in 3/8" and 1/2". The 60 metre camera cable also covers longer sections of pipe.

.jpg)
.jpg)
.jpg)
