Push Cable 7.5 mm x 60 Metres with Steel Reel, for Pipes from Ø 100 mm

Push cable 7.5 mm x 60 metres long, for pipes from Ø 100 mm, passing 87° bends from Ø 100 mm. Fits every one of our camera systems. Supplied with a coupling piece for KanalTV on a sturdy steel reel.

Core
The special manufacturing technology and structure allow a balanced combination: the more glass fibre the rod contains, the higher its pushing stability. Our rods therefore contain a particularly high share of 80 % high-grade glass fibre. All fibres are embedded in an elastic epoxy resin and bound into a compact core by a winding. This creates a wavy, resin-rich outer layer that absorbs the high surface tension under bending load, so very small bending radii are possible and tight pipe bends are easy to pass.

Sheathing
The wavy surface of the core improves the adhesion of the sheath and of the bonded end sleeves. The smooth plastic sheathing in polypropylene and polyethylene has excellent sliding properties and reduces friction to a minimum. It is highly resistant to temperature and abrasion.

Technical data

• Outer diameter: 7.5 mm
• Core diameter: 4.5 mm
• Sheath thickness: 1.50 mm
• Heat resistance: +100 °C
• Cold resistance: -20 °C
• Reel dimensions: height 790 mm / depth 250 mm / width 670 mm

Performance figures, dimensions, weights and properties stated by the manufacturer are without guarantee.