The short inflatable pipe plug DN 100 with 1/2" bypass seals pipes of nominal size DN 100. It is suitable for house connections, waste water pipes and municipal drainage systems, for temporary shut-off during renovation work, backflow protection or floods.
The plug is made of hard-wearing rubber with profiled grooves and adapts well to unevenness in the pipe wall. It is inflated through its air hose of approx. 1 m with tyre valve adapter, for example with a hand pump or compressor, and is designed for repeated use.
Technical data
- Nominal size: DN 100
- Bypass: 1/2"
- Max. inflation pressure: 2.0 bar
- Material: rubber with profiled grooves
- Temperature range: approx. -20 °C to +60 °C
- Weatherproof, resistant to service water and waste water, partly resistant to chemicals (see list below)
Applications
- Pipes, drains, sewers and drainage systems
- Temporary pipe shut-off or sealing work
- Flood protection in private or public areas
Do not exceed the maximum inflation pressure.
Chemical resistance
Resistant: boric acid, brake fluid (type W), butanol, calcium hydroxide, diethylene glycol, ethanol, ethylene glycol, glycerine, magnesium sulfate, methanol, nitric acid, potassium chloride, sodium chloride, sodium phosphate, sodium sulfate, stearic acid, vegetable oils, water.
Limited resistance: acetaldehyde, animal fats, arsenic acid, benzaldehyde, sulfuric acid.
Not resistant: ASTM oil No. 1, ASTM oil No. 2, ASTM oil No. 3, benzene, bromobenzene, butyl acetate, chloric acid, chlorobenzene, chloroform, chromic acid, cyclohexanol, cyclohexanone, diesel fuel, diethyl ether, ether, hexane, methacrylate, methylene chloride, mineral oils, n-heptane, naphthalene, nitrobenzene, palmitic acid, petrol, phenol, phosphoric acid, sodium hypochlorite, styrene, trichloroethylene.
.jpg)
.jpg)
.jpg)
Hotline +49 (0) 9405 955800
