PLUG SHORT FOR PIPE 150 MM Ø WITH TIRE VALVE

The short inflatable pipe plug DN 150 seals pipes with an inside diameter of 146 to 175 mm, for example rainwater pipes or house connections. The hard-wearing rubber with profiled grooves seals reliably and adapts well to unevenness in pipes and sewers.

The plug is inflated through its air hose of approx. 1 m with tyre valve adapter, which can be extended with accessories. It is designed for repeated use.

Technical data

• Nominal size: DN 150
• Application range: pipe Ø 146–175 mm
• Overall length: 253 mm
• Material: rubber with profiled grooves
• Temperature range: approx. -20 °C to +60 °C
• Weatherproof, resistant to service water and waste water, partly resistant to chemicals (see list below)

Applications

• Large drainage pipes and rainwater sewers
• Temporary shut-off during renovation work or for flood protection
• Maintenance of supply pipes

Chemical resistance

Resistant: boric acid, brake fluid (type W), butanol, calcium hydroxide, diethylene glycol, ethanol, ethylene glycol, glycerine, magnesium sulfate, methanol, nitric acid, potassium chloride, sodium chloride, sodium phosphate, sodium sulfate, stearic acid, vegetable oils, water.

Limited resistance: acetaldehyde, animal fats, arsenic acid, benzaldehyde, sulfuric acid.

Not resistant: ASTM oil No. 1, ASTM oil No. 2, ASTM oil No. 3, benzene, bromobenzene, butyl acetate, chloric acid, chlorobenzene, chloroform, chromic acid, cyclohexanol, cyclohexanone, diesel fuel, diethyl ether, ether, hexane, methacrylate, methylene chloride, mineral oils, n-heptane, naphthalene, nitrobenzene, palmitic acid, petrol, phenol, phosphoric acid, sodium hypochlorite, styrene, trichloroethylene.