PLUG LONG FOR PIPE 100 - 200 MM Ø WITH COMPRESSED AIR ADAPTER

The long multi-size inflatable pipe plug DN 100–200 is designed for medium pipe diameters. It seals and shuts off sewers and pipes, also for flood protection. Its round body is made in one piece without a longitudinal seam, from natural rubber with a fabric insert.

The flexible material adapts to all pipe materials, and the profiled surface gives a secure hold inside the pipe. The plug is inflated through the compressed air coupling with an air pump or compressor. The sturdy eye on the front is used to secure the plug with a safety line, available separately as an accessory.

Technical data

• Nominal size: DN 100–200
• Max. back pressure: 1.25 bar
• Max. inflation pressure: 2.5 bar
• Material: natural rubber with fabric insert, round body in one piece without longitudinal seam
• Connection: compressed air coupling
• Temperature range: approx. -30 °C to +80 °C
• Weatherproof, resistant to dirty water, service water and waste water, partly resistant to chemicals (see list below)

Applications

• Leak tests
• Temporary pipe shut-off during maintenance and renovation
• Emergency sealing of leaks
• Flood and backflow protection at buildings and sewers

Do not exceed the maximum inflation pressure.

Chemical resistance

Resistant: boric acid, brake fluid (type W), butanol, calcium hydroxide, diethylene glycol, ethanol, ethylene glycol, glycerine, magnesium sulfate, methanol, nitric acid, potassium chloride, sodium chloride, sodium phosphate, sodium sulfate, stearic acid, vegetable oils, water.

Limited resistance: acetaldehyde, animal fats, arsenic acid, benzaldehyde, sulfuric acid.

Not resistant: ASTM oil No. 1, ASTM oil No. 2, ASTM oil No. 3, benzene, bromobenzene, butyl acetate, chloric acid, chlorobenzene, chloroform, chromic acid, cyclohexanol, cyclohexanone, diesel fuel, diethyl ether, ether, hexane, methacrylate, methylene chloride, mineral oils, n-heptane, naphthalene, nitrobenzene, palmitic acid, petrol, phenol, phosphoric acid, sodium hypochlorite, styrene, trichloroethylene.