MANUAL PLUG WITH BYPASS 200 MM

The mechanical plug with bypass DN 200, also called a mechanical test plug, securely shuts off pipes of nominal size DN 200 and can also be used to test them. It is suitable for all pipe materials. As it is economical and maintenance-free, it can also be used for longer periods without supervision.

The integrated 1" bypass allows water leak tests to be carried out. The plug can also be used for flood protection.

Technical data

• Nominal size: DN 200
• Max. back pressure: 0.5 bar
• Bypass: 1"
• Temperature range: approx. -20 °C to +60 °C
• Resistant to service water and waste water, partly resistant to chemicals (see list below)

Applications

• Shutting off and securing pipes
• Water leak tests via the bypass
• Flood protection

Chemical resistance

Resistant: boric acid, brake fluid (type W), butanol, calcium hydroxide, diethylene glycol, ethanol, ethylene glycol, glycerine, magnesium sulfate, methanol, nitric acid, potassium chloride, sodium chloride, sodium phosphate, sodium sulfate, stearic acid, vegetable oils, water.

Limited resistance: acetaldehyde, animal fats, arsenic acid, benzaldehyde, sulfuric acid.

Not resistant: ASTM oil No. 1, ASTM oil No. 2, ASTM oil No. 3, benzene, bromobenzene, butyl acetate, chloric acid, chlorobenzene, chloroform, chromic acid, cyclohexanol, cyclohexanone, diesel fuel, diethyl ether, ether, hexane, methacrylate, methylene chloride, mineral oils, n-heptane, naphthalene, nitrobenzene, palmitic acid, petrol, phenol, phosphoric acid, sodium hypochlorite, styrene, trichloroethylene.