TEST PLUG 100 - 200 MM Ø, WITH BYPASS

The multi-size test plug DN 100–200 safely closes pipes and sewers with a diameter of 92 to 220 mm and allows them to be tested. The very robust material with a strong fabric insert adapts well to all pipe materials, and slight unevenness is no obstacle.

The plug has a 1" bypass with a Storz D coupling and is inflated through the compressed air coupling.

Technical data

• Nominal size: DN 100–200
• Application range: pipe Ø 92–220 mm
• Max. inflation pressure: 1.5 bar
• Overall length: 340 mm
• Weight: 4.5 kg
• Bypass: 1", Storz D coupling
• Connection: compressed air coupling
• Temperature range: approx. -30 °C to +80 °C
• Weatherproof, resistant to service water and waste water, partly resistant to chemicals (see list below)

Applications

• Leak testing of pipes and sewers
• Safely closing pipes and sewers

Do not exceed the maximum inflation pressure.

Chemical resistance

Resistant: boric acid, brake fluid (type W), butanol, calcium hydroxide, diethylene glycol, ethanol, ethylene glycol, glycerine, magnesium sulfate, methanol, nitric acid, potassium chloride, sodium chloride, sodium phosphate, sodium sulfate, stearic acid, vegetable oils, water.

Limited resistance: acetaldehyde, animal fats, arsenic acid, benzaldehyde, sulfuric acid.

Not resistant: ASTM oil No. 1, ASTM oil No. 2, ASTM oil No. 3, benzene, bromobenzene, butyl acetate, chloric acid, chlorobenzene, chloroform, chromic acid, cyclohexanol, cyclohexanone, diesel fuel, diethyl ether, ether, hexane, methacrylate, methylene chloride, mineral oils, n-heptane, naphthalene, nitrobenzene, palmitic acid, petrol, phenol, phosphoric acid, sodium hypochlorite, styrene, trichloroethylene.